02 Wood Tex Primer
Product DescriptionPigmented priming paint that offers extra durability, hiding power and protection against moisture. Prevents the formation of mould and mould growth on the surface of the final coat.
- Opaque priming paint
- Protects against moisture
- Extra durability
UsageIntermediate treatment before finishing with opaque wood stain or paint.
The substrate must be primed or previously treated.
SubstrateMust be clean, dry, solid and suitable for paint treatment.
Insufficiently protected cross-cut wood, water traps or the risk of water accumulation must not occur.
The moisture level in the wood prior to paint treatment max.:
Windows and doors: 12% ± 3; Overhangs, fences and cladding: 18%.
TreatmentLoose wood stain, paint and decayed wood fibres must be removed by cleaning and sanding
Dirt, grease, chalking material and algae, mould and mildew must be removed by cleaning.
Round off sharp edges for best possible hiding power
All bare woodwork must be treated before or immediately after mounting
Glossy, previously painted surfaces must be sanded matt.
New or bare cleaned wood must be primed with Flügger 01 Wood Tex Priming Oil.
Substrate which has stood untreated for longer than 4 weeks must be cleaned and loose wood fibres removed
ApplicationBrush, roller or spray.
If applying using a roller or spray, brush over afterwards.
Choose appropriate tools for the desired finish.
Apply wet-on-wet, and finish by brushing in the same direction.
Cold or heat can affect the material’s viscosity
Material temperature when spraying must be min. 15°C.
Condensation must not form.
Avoid working in direct sunlight.
Cold weather and high humidity increase the drying time, complete curing and re-treatment interval.
High temperature and low humidity reduce the drying time and complete curing.
Always apply test treatments to check and accept the adhesion and results.
Be AwareProtect freshly painted surface from adverse weather conditions.
Take appropriate measures against the effects of moisture and rainfall on freshly painted surfaces.
The surface achieves maximum robustness when fully cured.
Storage: Cool, frost free and tightly closed
Clean off the paint from tools and wash them with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.: