Flügger Facade Impregnation

Flügger Facade Impregnation

Product Description

  • Water and dirt-repellent impregnation that provides long-lasting protection and reduces absorption of dirt.
  • Minimises the risk of efflorescence and frost burst.
  • Provides a diffusion-open treatment that protects untreated surfaces.

Unique Features

  • Diffusion-open
  • Extremely water-repellent
  • Dirt-repellent

Environmental Information

Protection equipment for: Spray painting: painting suit, full face mask with combined filter. Painting: eye protection, gloves. Sanding: respiratory protection.
Environment information: Clean off the paint from tools and wash them with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.

Usage

  • Untreated mineral facades e.g. cement, concrete and brick.
  • Substrate must be new or untreated. Can also be used on concrete slabs.
Nominal spreading rate (m2/l)
5

Preparation

Substrate
Must be absorbent, clean, dry, solid and suitable for surface treatment. Can be used directly on new substrate. Surfaces older than 1 year should be cleaned and dry 24 hours before treatment.

Treatment

  • Dirt, grease and chalking material must be removed with Facade Clean.
  • Algae, mould and mildew growth are removed by cleaning with Facade Anti-green.
Washability

Application

  • Brush, roller or spray.
  • One application is usually enough. If a second coat is necessary, this should be wet-on-wet.
  • Condensation must not form.
  • Avoid working in direct sunlight.
  • Cold weather and high humidity increase the drying time and complete curing.
  • High temperature and low humidity reduce the drying time and complete curing.
  • Surfaces must not be exposed to frost for 24 hours after treatment is completed.
  • Always apply test treatments to check and accept the adhesion and results.

Finishing

Finishing

Dry to touch at 20°C, 60% RF (Hours)
2
Recoatable at 20c, 60% RF (Hours)
0
Fully cured at 20c, 60% RF (Days)
28

Storage
Cool, frost free and tightly closed

Cleaning of Tools etc.
Water and soap

Be Aware

  • Cover window glass, metal etc, as spattering may have a mattering effect.
  • If the surface is to be painted later, this can only be done at least 1 year after application of Facade Impregnation.

Technical Data

Density (kg/liter)
1
Weight %
0
Volume %
0
Dilution
Do not dilute
Humidity
Max. humidity 80 % RH.

Version

16-12-2019