Product DescriptionMatt wall and ceiling paint. Recommended for premises with normal functional requirements that are exposed to some dirt and wear and tear.
- Wall and ceiling paint
- Subdued gloss
- Robust surface
UsageLiving rooms, corridors, entrance areas, offices, kitchens, washrooms, commercial premises, clinics and retail shops.
Concrete, lightweight concrete, plaster, bricks, gypsumboards, fiber plaster, cement fiber boards, cement particle boards.
SubstrateMust be clean, dry, solid and suitable for surface treatment.
TreatmentRemove loose material and paint by cleaninng and sanding.
Remove dirt, grime, grease and chalking materials with Fluren 37.
Water blotches or surfaces stained by nicotine or soot must be cleaned with Fluren 49 and treated with Stop Primer.
Hard, smooth surfaces should be sanded matt and painted with Fix Primer as required.
Cracks, unevenness and holes must be spackled.
Absorbent and porous substrates must be primed with Flügger Sealer
Priming is done with Combi Primer or Special Primer.
Apply 1-2 times. Some colours require an extra treatment.
ApplicationBrush, roller or spray
Decide your choice of tool/utensil depending on the finish
Apply wet on wet and finish by brushing/rolling in the same direction
Always use the same batch number on contiguous/unbroken surfaces
Differences in surface structure can result in colour deviation
Cold/heat can affect the viscosity of the material
Material temperature for spray painting, min. 12⁰C
Condensation during drying/curing must not occur.
Cold and increased humidity extends drying time, full curing and recoat interval
Increased temperature and low atmospheric humidity reduce drying time and full curing
Always perform a test treatment for a check and acceptance of adhesion and result
ResultsMatt strong surface.
Uniform even structure with subdued gloss.
Withstands cleaning including spot cleaning with mild detergents without abrasives, soft brush, water and cloth.
Strong especially dark shades are more delicate than light by wear and touch.
Chalking from strong shades due to excess pigment may occur.
Does not block strike-through from knots or water-soluble colourants, water stains and nicotine.
Exercise care in loading the surface until the paint is fully cured.
Environmental informationClean off the paint from tools and wash them with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.
Storage: Cool, frost free and tightly closed
Protection equipment: Spray painting: painting suit, full face mask with combined filter. Painting: eye protection, gloves. Sanding: respiratory protection
Current TDS Version
Replaces TDS Version