Flutex 5 Matt

Flutex 5 Matt

Flutex 5, 7, 10 and 20 are eco-labelled acrylic paints. Hiding power, robustness and adhesion are priorities. A perfect choice in terms of quality and economy.

Product Description

Matt wall and ceiling paint. Recommended for premises with normal functional requirements that are exposed to some dirt and wear and tear.
  • Wall and ceiling paint
  • Subdued gloss
  • Robust surface

Usage

Living rooms, corridors, entrance areas, offices, kitchens, washrooms, commercial premises, clinics and retail shops.
Concrete, lightweight concrete, plaster, bricks, gypsumboards, fiber plaster, cement fiber boards, cement particle boards.

Substrate

Must be clean, dry, solid and suitable for surface treatment.

Treatment

Remove loose material and paint by cleaninng and sanding.
Remove dirt, grime, grease and chalking materials with Fluren 37.
Water blotches or surfaces stained by nicotine or soot must be cleaned with Fluren 49 and treated with Stop Primer.
Hard, smooth surfaces should be sanded matt and painted with Fix Primer as required.
Cracks, unevenness and holes must be spackled.
Absorbent and porous substrates must be primed with Flügger Sealer
Priming is done with Combi Primer or Special Primer.
Apply 1-2 times. Some colours require an extra treatment.

Application

Brush, roller or spray
Decide your choice of tool/utensil depending on the finish
Apply wet on wet and finish by brushing/rolling in the same direction
Always use the same batch number on contiguous/unbroken surfaces
Differences in surface structure can result in colour deviation
Cold/heat can affect the viscosity of the material
Material temperature for spray painting, min. 12⁰C
Condensation during drying/curing must not occur.
Cold and increased humidity extends drying time, full curing and recoat interval
Increased temperature and low atmospheric humidity reduce drying time and full curing
Always perform a test treatment for a check and acceptance of adhesion and result

Environmental information

Clean off the paint from tools and wash them with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.

Storage: Cool, frost free and tightly closed

Protection equipment: Spray painting: painting suit, full face mask with combined filter. Painting: eye protection, gloves. Sanding: respiratory protection

Technical Data

Producttype
Acrylic Paint
Gloss
Matte,5
Density (kg/liter)
1.48
Weight %
59,8
Volume %
42,1
Nominal spreading rate (m2/l)
8
Humidity
Max. humidity 80 % RH.
Dry to touch at 20°C, 60% RF (Hours)
1
Recoatable at 20c, 60% RF (Hours)
4
Fully cured at 20c, 60% RF (Days)
28
Washability
Class 1
Dilution
Water, is usually not diluted
Cleaning of Tools etc.
Water
Supplementary Info
Registered in the Nordic Ecolabelling Building Products Database for products which can be used in buildings with the Swan label.

Current TDS Version

januar 2021


Replaces TDS Version

oktober 2020