DETALE CPH is a line of exclusive decorative products to take care of the small details. Paints and finishes are inspired by our Nordic design heritage and the changeability of nature. The products are suitable for professional as well as do-it-yourself use.

Product Description

Coloured decorative plaster for walls and ceilings. Finish using DETALE Topcoat. Produces a textured faux surface with depth. Recommended for premises with medium functional requirements, that are exposed to dirt and moderate wear and tear.
  • Faux finish with depth
  • Matte and velvety smooth finish
  • Dirt resistance corresponding to a matt painted surface


Living rooms, entrances, offices, business premises, clinics, shops, hotels and restaurants.
Concrete, light concrete, plaster, brick, gypsum board and previously painted surfaces.


Must be clean, dry, firm and suitable for surface treatment.


Remove loose material and paint by cleaning, sanding and dusting.
Remove dirt, grime, grease and flaking material by cleaning thoroughly.
Sand flat hard, slippery surfaces.
Cracks, unevenness and holes must be filled.
Apply twice before application of DETALE Topcoat.


Spread with a wide spatula in an even, covering layer.
Work the filler and smooth it out as you go.
Decide your choice of tools based on the size of the surface.
Cold/heat can affect the viscosity of the material.
Avoid condensation formation.
Cold and increased humidity extends drying time, full curing and recoating interval.
Increased temperature and low atmospheric humidity reduce drying time and full curing.
Risk of shrinkage where the filler paste is not completely cured before additional treatment.
Always test for control and acceptance of adhesion and result.

Good to know

The look reflects how the filler was applied.
Be sure to apply filler in soft arches and avoid applying in the same direction.
Bubbles can appear and help emphasise the natural look.

Environmental information

Remove as much plaster as possible before cleaning with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.

Storage: Cool, frost free and tightly closed

Protection equipment: Painting: eye protection, gloves. Sanding: respiratory protection.

Technical Data

Plaster & Sealant
Density (kg/liter)
Weight %
Volume %
Nominal spreading rate (m2/l)
Max. humidity 80 % RH.
Fully cured at 20c, 60% RF (Days)
Class 2
Cleaning of Tools etc.
Supplementary Info
Registered in the Nordic Ecolabelling Building Products Database for products which can be used in buildings with the Swan label.

Current TDS Version

desember 2020