Sand

Sand

Product Description

Type: Latex wall paint, based on acrylic binder, added sand-like particles. Flügger Sand paint is a special wall paint that provides a surface with a rustic, fine-plastered look. When tinted, the colour will be darker than the same colour tinted in traditional latex wall paint.

Usage

Suitable interior on walls where a surface with a rustic, fine-plastered look
is desired, e.g. in offices, living rooms and corridors.
The substrate must be clean, dry, solid and suitable for being painted.
Cleaning before repainting should be made with Fluren 37, Basic Cleaner.
Slightly chalking or absorbent surfaces should be primed with Flügger Sealer.
The best result is obtained if the substrate is painted with traditional
latex wall paint in the same colour as Flügger Sand, before applying
Flügger Sand.
Stir before use.
Application with a wide brush in all directions or in circle movements
depending on the desired effect.
Can also be applied with short-piled roller followed by processing with wide
brush to obtain the correct effect.
Do not apply on areas bigger than can be processed with brush in wet paint.
Apply 2 coats to obtain the best result.

Be Aware

OBS! It is recommended to make a sample draw-down until technique and result
are satisfactory.

Storage: Cool, frost-free and tightly closed

Technical Data

Producttype
Acrylic Paint
Gloss
Matte,5
Density (kg/liter)
1,64
Weight %
67
Volume %
46
Nominal spreading rate (m2/l)
5
Workable temperature
Min. +5°C
Dry to touch at 20°C, 60% RF (Hours)
1
Fully cured at 20c, 60% RF (Days)
28
Dilution
Must not be diluted
Cleaning of Tools etc.
Water

Current TDS Version

september 2006


Replaces TDS Version

januar 2003