Wet room paint
Product DescriptionSemi-matte wet room paint. Recommended for surfaces that are exposed to particularly high functional requirements, with changing moisture and water conditions as well as dirt and use-related wear. Included in Flügger wet room treatment.
- Excellent wear resistance and extremely easy-to-clean surface
- Prevents the formation of mould and mould growth on the surface
- For finishing treatment in wet rooms
UsageBathrooms, toilets and similar wet rooms.
SubstrateMust be clean, dry, firm and suitable for surface treatment.
TreatmentRemove loose material and paint by cleaning and sanding.
Remove dirt, grime, grease and chalking materials by cleaning with Fluren 37.
Remove lime and soap residue using Fluren 33.
Sand hard, slippery surfaces flat.
Cracks, holes and irregularities must be spackled with suitable joint filler/spackle.
Absorbent and porous substrate primed with Sealer.
Install glass tissue/glass felt using Flügger Wet Room Primer.
Apply wet room paint 2 times. Some shades require an extra treatment.
ApplicationBrush, roller or spray.
Decide your choice of tool/utensil depending on the finish.
Apply wet on wet and finish by brushing/rolling in the same direction.
Always use the same batch number on contiguous/unbroken surfaces.
Differences in surface structure can result in colour deviation.
Cold/heat can affect the viscosity of the material.
Material temperature for spray painting, min. 12⁰C.
Condensation during drying/curing must not occur.
Cold and increased humidity extends drying time, full curing and recoat interval.
Increased temperature and low atmospheric humidity reduce drying time and full curing.
Always perform a test treatment for a check and acceptance of adhesion and result.
ResultsSemi-matte, strong surface
Uniform, smooth texture with clear gloss.
Withstands cleaning with water, cleaning agents, brush and cloth.
Strong, especially dark shades are more susceptible to wear and tear than bright shades.
Coat the surface with care and avoid direct contact with water before the paint is fully cured.
Be AwareNot suitable for surfaces where there are requirements for water and vapor tight wet room protection.
Environmental informationClean off the paint from tools and wash them with water. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.
Storage: Cool, frost free and tightly closed
Protection equipment: Spray painting: painting suit, full face mask with combined filter. Painting: eye protection, gloves. Sanding: respiratory protection
Current TDS Version
Replaces TDS Version